Tips To Avoid Mistakes During The 3D Printing Process

Tips To Avoid Mistakes During The 3D Printing Process

One of the first things to remember is that mistakes can be minor or major. For example, you may not care about the strength or appearance of a component if it is only a prototype. Nevertheless, mistakes are inevitable, and there are some crucial guidelines that you should follow during the 3D printing in Dubai. This article will teach you some of the most important guidelines related to the material and design.

File resolution:

The resolution of your file is an important factor in the final print quality of your model. High-resolution files can be difficult to handle and may contain too many details for the printer to process. It would help if you kept your STL file size under 100MB when uploading it.

Support material:

During the initial stages of the 3d printing process, it is important to select soluble support material. Unlike single-material printing, soluble support materials are much more expensive. Usually, soluble support is 1-2 times the cost of the main printed material. As a result, it is essential to select the proper support material during the initial stages of the 3d printing process.


Optimizing the orientation of your 3D-printed models is crucial to achieving the best results. Avoiding these common mistakes will save time, material, and effort. However, the right orientation may not be possible in all cases. To achieve the best results, never underestimate these things when using a 3D printer. If you make a mistake in orientation, you may end up wasting hours of time and materials.

Material-related design guidelines:

Many 3D modeling software options are available, but selecting a specific material is particularly important. Whether you’re working with ABS, ceramics, or nylon, each material has different qualities and requirements. The design for each material must be designed to take advantage of its properties. It should also incorporate appropriate corners and overhanging parts.

Getting rid of strings with a heat gun:

Getting rid of strings can be tricky, especially if you print different types of filament. To make the surface finish smoother, you can use a heat gun to melt the infill. To melt the infill quickly, hold the heat gun a few centimeters away from the print. Use the tool to apply a few seconds of heat to the piece.